Yamaha DT 360A
| Manufacturer | Yamaha |
|---|---|
| Production | 1973 |
| Class | Enduro |
| Engine | Single cylinder, two stroke, air-cooled |
| Bore / Stroke | 78.7mm x 78.7mm |
| Compression ratio | 6.4:1 |
| Horse Power | 32.05 HP (23.9 KW) @ 6000RPM |
| Torque | 25.82 ft/lbs (35.0 Nm) @ 6500RPM |
| Transmission | Gear box: 5-Speed Final Drive: Chain |
| Suspension | Front: Telescopic forks Rear: Dual shocks |
| Brakes | Front: Drum Rear: Drum |
| Front Tire | 3.00-21 |
| Rear Tire | 4.00-18 |
| Wheelbase | 56.1 inches (1425 mm) |
| Weight | (dry), 134.0 kg (wet) |
| Manuals | Service Manual |
| Tech Specs · Brochures · Reviews · Ads · Videos | |
The Yamaha DT 360A was a Single cylinder, two stroke, air-cooled Enduro motorcycle produced by Yamaha in 1973. Max torque was 25.82 ft/lbs (35.0 Nm) @ 6500 RPM. Claimed horsepower was 32.05 HP (23.9 KW) @ 6000 RPM.
Engine
A 78.7mm bore x 78.7mm stroke result in a displacement of just 351.0 cubic centimeters.
Drive
The bike has a 5-Speed transmission. Power was moderated via the Wet multi-plate.
Chassis
It came with a 3.00-21 front tire and a 4.00-18 rear tire. Stopping was achieved via Drum in the front and a Drum in the rear. The front suspension was a Telescopic forks while the rear was equipped with a Dual shocks. The wheelbase was 56.1 inches (1425 mm) long.
1973 - 1975 Yamaha DT 360A
The DT360A has a new frame longer and heavier than that of old enduro. This bike can go 10 to 15 24 Km (15 mph) faster than last year enduro with less rider effort.