Honda XR230: history, specs, pictures
The Honda XR230 Motard was a single cylinder, four-stroke standard produced by Honda in 2011. Max torque was 13.28 ft/lbs (18.0 Nm) @ 5500 RPM.
Honda XR230 | |
Manufacturer | |
---|---|
Also called | XR230 Motard, XR 230 Motard |
Production | 2011 |
Class | Trail |
Engine | single cylinder, four-stroke |
Bore / Stroke | 65.5mm x 66.2mm |
Torque | 13.28 ft/lbs (18.0 Nm) @ 5500RPM |
Fuel System | carburetor |
Ignition | cdi |
Transmission | Gear box: 6-speed Final Drive: chain |
Suspension | Front: telescopic fork Rear: pro-link swing arm |
Brakes | Front: single disc Rear: single disc |
Front Tire | 110/70-17 |
Rear Tire | 130/70-17 |
Wheelbase | 52.76 inches (1340 mm) |
Length | 79.33 inches (2015 mm) |
Width | 32.09 inches (815 mm) |
Height | 42.52 inches (1080 mm) |
Seat Height | 31.5 inches (800 mm) |
Weight | 125.0 kg (wet) |
Recommended Oil | Honda GN4 10W-40 |
Fuel Capacity | 2.3 Gallon (8.71 Liters) |
Manuals | Service Manual |
EngineEdit
The engine was a air cooled single cylinder, four-stroke. A 65.5mm bore x 66.2mm stroke result in a displacement of just 223.0 cubic centimeters. Fuel was supplied via a overhead cams (ohc).
DriveEdit
The bike has a 6-speed transmission. Power was moderated via the wet, multiplate.
ChassisEdit
It came with a 110/70-17 front tire and a 130/70-17 rear tire. Stopping was achieved via single disc in the front and a single disc in the rear. The front suspension was a telescopic fork while the rear was equipped with a pro-link swing arm. The XR230 Motard was fitted with a 2.3 Gallon (8.71 Liters) fuel tank. The wheelbase was 52.76 inches (1340 mm) long.
Motorcycles: CB series | CBF series | CM/CMX series | CX Series | CBR series | NSR series | CR series | Pacific Coast | XR/XL series | Bros/HawkGT | VF/VFR series | VT series | VTX series | ST series | Valkyrie series | GL series| NR series |
Mopeds and light motorcycles: Ape models | Cub series | CT series | ST series/Dax | S series |Wave series | Z series |