BMW HP2 Rennboxer: history, specs, pictures
'BMW HP2 Rennboxer' | |
Manufacturer | [[BMW]] |
---|---|
Production | 2008 |
Engine | two cylinder boxer, two-stroke |
Bore / Stroke | 101.0mm x 73.0mm |
Fuel System | injection. electronic intake pipe injection / bms-k digital engine management with overrun fuel cut-off, single-spark ignition |
Transmission | Gear box: 6-speed Final Drive: shaft drive (cardan) |
Suspension | Front: telelever, spring pre-load continuously variable, compression damping, rebound damping and vehicle height adjustable Rear: evo paralever, öhlins central spring strut, spring pre-load continuously adjustable, rebound and compression damping adjustable, vehicle height adjustable |
Brakes | Front: double disc Rear: single disc |
Front Tire | 120/70-17 |
Rear Tire | 190/55-17 |
Wheelbase | 58.46 inches (1485 mm) |
Length | 84.06 inches (2135 mm) |
Seat Height | 32.68 inches (830 mm) |
Weight | |
Fuel Capacity | 4.23 Gallon (16.00 Liters) |
Manuals | Service Manual |
The BMW HP2 Rennboxer was a two cylinder boxer, two-stroke standard produced by BMW in 2008.
Engine
The engine was a oil & air cooled two cylinder boxer, two-stroke. A 101.0mm bore x 73.0mm stroke result in a displacement of just 1170.0 cubic centimeters.
Drive
The bike has a 6-speed transmission. Power was moderated via the single dry plate clutch, hydraulically operated.
Chassis
It came with a 120/70-17 front tire and a 190/55-17 rear tire. Stopping was achieved via double disc in the front and a single disc in the rear. The front suspension was a telelever, spring pre-load continuously variable, compression damping, rebound damping and vehicle height adjustable while the rear was equipped with a evo paralever, öhlins central spring strut, spring pre-load continuously adjustable, rebound and compression damping adjustable, vehicle height adjustable. The HP2 Rennboxer was fitted with a 4.23 Gallon (16.00 Liters) fuel tank. The wheelbase was 58.46 inches (1485 mm) long.