Difference between revisions of "Ducati 100 CADET"
(upgrading template) |
(template fixes) |
||
Line 3: | Line 3: | ||
{{Motorcycle | {{Motorcycle | ||
|name = '''Ducati 100 CADET''' | |name = '''Ducati 100 CADET''' | ||
| | |photo=ducati-100-cadet-1966-1966-2.jpg | ||
|aka = | |aka = | ||
|manufacturer = [[Ducati]] | |manufacturer = [[Ducati]] |
Revision as of 19:09, 9 November 2019
'Ducati 100 CADET' | |
Manufacturer | [[Ducati]] |
---|---|
Production | 1966 |
Class | [[:Category:Classic motorcycles|Classic]] [[Category:Classic motorcycles]] |
Engine | Single cylinder, 2-stroke, piston port |
Bore / Stroke | 50.8mm x 50.8mm |
Compression ratio | 10.0:1 |
Horsepower | 7.24 HP (5.4 KW) @ 7000RPM |
Transmission | Gear box: 3-Speed Final Drive: Chain |
Suspension | Front: Telescopic fork Rear: Swingarm, twin shocks |
Brakes | Front: Drum Rear: Drum |
Front Tire | 2.25-18 |
Rear Tire | 2.50-18 |
Wheelbase | 45.71 inches (1161 mm) |
Length | 71.3 inches (1811 mm) |
Width | 25.98 inches (660 mm) |
Seat Height | 29.49 inches (749 mm) |
Weight | 66.0 kg (wet) |
Manuals | Service Manual |
The Ducati 100 CADET was a Single cylinder, 2-stroke, piston port Classic motorcycle produced by Ducati in 1966. Claimed horsepower was 7.24 HP (5.4 KW) @ 7000 RPM.
Engine
A 50.8mm bore x 50.8mm stroke result in a displacement of just 97.0 cubic centimeters.
Drive
The bike has a 3-Speed transmission. Power was moderated via the Wet Multi-plate.
Chassis
It came with a 2.25-18 front tire and a 2.50-18 rear tire. Stopping was achieved via Drum in the front and a Drum in the rear. The front suspension was a Telescopic fork while the rear was equipped with a Swingarm, twin shocks. The wheelbase was 45.71 inches (1161 mm) long.
1966 Ducati 100 CADET
The Cadet was a road bike, powered by a 97.6cc engine. This was good for 7.2 horsepower, and as this example is an early model the engine is paired to a twist grip handlebar shift.